Keeping your Ram truck running smoothly requires regular maintenance, and that includes changing the transmission fluid. For Ram 2500 and 3500 models with a 68RFE automatic transmission, changing the fluid is a relatively straightforward process that can be done at home with some basic tools. In this blog post, we’ll walk you through the steps involved, providing a clear and easy-to-understand guide for DIY enthusiasts.
Before You Begin
Before diving in, it’s important to gather the necessary parts. You’ll need:
- A new spin-on filter
- A new flat filter
- A new O-ring
- RTV Gasket Maker
- Transmission fluid
- Creeper
- Pans
- Extension
- 8mm ratchet
- Funnel

Safety First
Always prioritize safety when working on your vehicle. Park on a level surface and engage the parking brake. Consult your Ram’s owner’s manual for specific recommendations.
Step-by-Step Guide
- Drain the Old Fluid: Locate the transmission pan underneath your truck and remove the 15 bolts securing it. You might need a rubber mallet to gently break the silicone seal. Pro-Tip: Place a large drain pan underneath to collect the old fluid responsibly.
- Cleaning Up: With the pan removed, take this opportunity to thoroughly clean it and the mating surface on the transmission itself. A clean surface ensures a proper seal when reinstalling the pan.
- New Filter Installation: Install the new flat filter, ensuring the O-ring is securely placed first. Remove and install a new spin on filter.
- Sealing the Deal: Apply a fresh coat of RTV sealant to the transmission pan for an optimal seal.
- Reassembly: Reattach the transmission pan, carefully tightening the bolts to 7-9 foot-pounds of torque. Jumping across the pan, making sure it seals evenly.
- Topping Up: Using a funnel, add new transmission fluid through the dipstick tube until the level reaches the “full or cross marks are reached” on the dipstick. CHECK MULTIPLE TIMES TO ENSURE THE CORRECT LEVEL FOR YOUR TRUCK. Pro-Tip: Check while the truck is warmed up and idling in neutral.

Disclaimer
While this DIY guide provides a general overview, the complexity of car maintenance can vary. If you’re unsure about any step, consulting a certified mechanic is always recommended. They have the expertise and tools to ensure the job is done correctly and safely.
