Tools you will need:
- 10mm open-end wrench, extension, and ratchet
- 13mm deep socket
- Medium strength loctite
- Microfiber cloths and rags
- Large towel to catch drips
- Container to catch old fluid
- Screwdriver and channel locks (potentially)
- creeper (not necessary but helpful)
- Torque wrench (not necessary but helpful)
Fluids you will need:
Steps:
- Park your truck on a level surface and engage the parking brake.
- Loosen the fill plug on the differential with the 13mm deep socket.
- Remove all bolts and pull off the diff cover and reuseable gasket.
- While the fluid is draining, clean the fill plug and the diff cover with a towel.
- Let the differential drain completely.
- Once the draining is done, clean the mating surfaces of the differential cover and the housing with a rag.
- Apply a thin layer of medium strength loctite to the threads of the diff cover bolts.
- Reinstall the bolts and tighten it to 30 ft-lbs of torque with the torque wrench. If you don’t have a torque wrench, tighten it snugly.
- Wipe off any excess loctite that may have squeezed out.
- Fill the differential with new gear oil until fluid starts to drip out of the fill hole.
- Reinstall the fill plug and tighten it to 30 ft-lbs of torque.
- Wipe down the entire differential to remove any excess oil.
Tips:
- The recommended interval for changing differential fluid is every 20,000 miles, or more often under severe use.
- You can reuse the differential cover gasket.
- When refilling the differential, it’s best to use a pump to avoid spilling.
