Lippert’s Road Armor equalizers and wet bolt kit offer an upgrade for your trailer’s suspension, improving ride quality and potentially extending the life of your components. If you’re handy with tools and comfortable working underneath your trailer, this guide will walk you through the installation process.
Before You Begin:
- Gather your tools: Wrenches, sockets, ratchet, torque wrench, hammer, pry bar, safety glasses, gloves, jack stands (4), floor jack.
- Safety First! Ensure your trailer is parked on a level surface and securely chocked. Engage the parking brake.
- Consult the instructions included in your specific Road Armor and wet bolt kit, as there may be slight variations depending on the model.
Step-by-Step Guide:
- Raise the Trailer: Using the floor jack, carefully lift one side of the trailer frame. Secure it with jack stands placed on designated frame points (refer to your trailer’s manual). Repeat for the other side.
- Remove Tires: Loosen the lug nuts, remove the wheels, and set them aside.
- Detach Shackles and Equalizer: Locate the existing equalizer (a metal bar connecting the leaf springs on both axles). Identify the shackle bolts connecting the equalizer to the leaf springs and frame. Use wrenches and sockets to loosen and remove these bolts. The shackle assemblies and the old equalizer should become loose.
- Remove Old Bushings: The old equalizer might have bushings pressed into the leaf spring eyeholes. These may need removal to install the new bronze bushings that come with the wet bolt kit (if applicable).
- Optional: If the bushings are worn but not easily removable, use a hammer and pry bar to carefully remove them. Be cautious not to damage the leaf spring eyeholes.

- Install New Bushings: Carefully press the new bronze bushings into the leaf spring eyeholes using a suitable tool (consult the wet bolt kit instructions for specific methods). Ensure they are flush and seated properly.
- Position New Equalizer: Slide the new Road Armor equalizer into place, aligning the holes with the leaf spring eyeholes and the frame bracket.
- Attach New Shackles: Thread the new wet bolts (from the wet bolt kit) through the corresponding holes, starting from the frame side and going through the equalizer bushings and leaf spring eyeholes. Install the shackle assemblies onto the bolts and secure them with nuts and washers. Tighten the nuts firmly with a wrench, but don’t over-tighten yet.
- Repeat on Other Side: Lower the jack on the completed side slightly, then repeat steps 3-7 for the other side of the trailer.

- Torque Everything to Spec: Once both sides are assembled, use a torque wrench to tighten all the bolts to the specifications outlined in the Road Armor and wet bolt kit instructions (torque specifications are crucial for proper functionality and safety).
- Reassemble and Lower: Double-check that everything is secure. Re-install the wheels and tighten the lug nuts to the proper torque (refer to your trailer’s manual). Carefully lower the trailer using the jack stands and floor jack, then remove them.
- Post-Installation Check: After your first trip with the new suspension components, re-check all the bolts for tightness to ensure they haven’t loosened during travel.
Congratulations! You’ve successfully installed your Lippert Road Armor equalizers and wet bolt kit. Enjoy a smoother ride and potentially improved trailer longevity!

Additional Tips:
- Take pictures during disassembly to aid in reassembly.
- Apply a penetrating lubricant to stubborn bolts before loosening them.
- Consider having a helper to assist with lifting and holding components.
- If you’re unsure about any step, consult a professional mechanic familiar with trailer suspension systems.
