Taking care of your Ram 2500’s mighty 6.7L Cummins engine means regular maintenance, and changing the fuel filters is a crucial part of that routine. Don’t worry, it’s not as daunting as it might sound! This step-by-step guide will walk you through the process so you can tackle this job yourself and save some cash.
Before you begin:
- Gather your tools: You’ll need a socket wrench set, oil filter wrench, drain pan, clean rags, safety glasses, and gloves.
- Buy the right filters: Make sure you have the correct fuel filters for your specific model year and engine variation. Check your owner’s manual or consult a parts store to be certain.
- Choose a safe and well-ventilated workspace: Avoid sparks and flames, so work outdoors or in a well-ventilated garage.
- Clear the workspace: Remove any obstructions around the engine to give yourself ample room to work.

Let’s get started!
- Locate the filters: Your Ram 2500 has two fuel filters; one in the engine bay and one near the rear axle. The engine bay filter is easier to access, so we’ll tackle that one first.
- Drain the fuel: Look for a yellow screw cap on the bottom of the engine bay filter housing. Place your drain pan underneath and use a screwdriver to loosen the cap. Be careful; some fuel will drain out. Let it drain completely, then clean up any spills.
- Remove the old filter: Use the appropriate socket wrench to loosen the nut on the top of the filter housing. Carefully unscrew the housing and remove the old filter. Be mindful of any remaining fuel that might spill.
- Prep the new filter: Lightly coat the gasket of the new filter with clean oil. Screw the new filter into the housing hand-tight first, then use the socket wrench to tighten it to the specified torque in your owner’s manual. Don’t overtighten!
- Reassemble the housing: Screw the housing back onto the filter base and tighten the nut with the socket wrench. Replace the yellow drain cap and tighten it snugly.
- Move on to the rear filter: Locate the second filter near the rear axle, mounted on the driver’s side frame rail. The process is similar to the engine bay filter. Drain the fuel, remove the old filter, install the new one with a fresh gasket, and reassemble the housing.
- Prime the system: Turn the ignition key to the “RUN” position (without starting the engine) for about 30 seconds. This allows the fuel system to prime with the new filters. Repeat this process four or five times.
- Start the engine: Give your truck a crank! If everything went smoothly, it should fire up without issue. Check for any leaks around the filter housings.
Congratulations! You’ve successfully changed the fuel filters on your Ram 2500/3500 and kept its engine running strong. Remember to dispose of the old filters responsibly and reset the maintenance reminder light if your truck has one. (Learn how to reset the light here)

Bonus tips:
- Wear gloves and safety glasses throughout the process.
- Take your time and work carefully! Don’t hesitate to consult your owner’s manual if you encounter any issues. Watch our detailed instructional video here.
By following these steps and exercising caution, you can keep your Ram 2500/3500 running smoothly and efficiently for years to come. Happy wrenching!
