Today I’m tackling some routine maintenance on my Ram 2500, it’s 2016 with the 6.7 liter Cummins engine. Specifically, I’m replacing the crankcase filter, also known as the CCV filter. If you’ve got one of these trucks, you’ll likely get a message around the 65,000 miles telling you to perform service. Basically, there’s a filter that goes under the valve cover that needs to be changed, and the dealer charges a hefty amount to do it – I’ve heard anywhere from $300 to $700! That’s why I decided to make this video: to show you how to save some money and do it yourself.
Here’s what you’ll need for the job:
- 8mm socket with a swivel and extension (maybe)
- Screwdrivers for a couple of plugs
- Small pry tool (optional)
- Replacement crankcase filter
- Your favorite beverage
First things first, you’ll need a good step stool because these trucks are tall.
The first step is to remove the plastic cover that’s held on by eight 8mm bolts. There’s also the oil cap and dipstick that need to come out. Once you’ve got that removed, you’ll see a bunch of 8mm bolts holding the valve cover on. There’s also a small connector that you can pry off with a screwdriver.
Now you can remove the valve cover itself. Be careful here – there’s a breather hose you can try and leave on, but I just folded the cover over to access the filter underneath. The filter itself just pops out, and then you can put the new one in. A little trick my dad taught me is to always double-check the new parts to make sure they look identical to the old ones. You don’t want to accidentally install something wrong.
Once the new filter is in place, put the valve cover back on and tighten the bolts in a crisscross pattern to ensure an even seal.
The final step is to reset the service light on your dash. Here’s how to do it:
- Put the key to the “on” position, but don’t start the engine.
- Push the brake pedal twice.
- Slowly press the gas pedal all the way down, then release it completely. Repeat this one more time.
- Turn the key to the “off” position.
Check your dash – the service light should be gone!
In total, this job took me about 35 minutes, but that’s because I was filming. I reckon you could probably knock it out in 10 minutes if you’re not making a video. And the best part? I saved myself around $400 by doing it myself!
***Parts can be found here.***
If you have any questions about this process, feel free to leave them below, And if you find this article helpful, consider subscribing to our blog!
